Prestige Line Cantilever Sliding 

1/10
Prestige
Cantilever Sliding

Sliding gates are the ideal solution for industrial environments where the large steps required in housing due to small masonry work require a traditional swing door.

Speaking of safety, however, both types of openings are regulated by EN 13241-1, which specifies in detail the safety requirements for doors, gates and barriers installed in places accessible to people or vehicles in commercial, industrial and residential contexts.

One of the main dangers of sliding doors is certainly off the track (derailment) and its relative fall causing damage to property and people.

In fact, traditional sliding doors have a structure characterized by the presence of the ground guide through which the door circulates, but there are types that, thanks to new technologies, offer enhanced safety.

Cantilever doors lack floor guides, but feature a monorail attached to the base of the door that slides on two solid trolleys with the ground with a foundation.

This system guarantees maximum safety with anti-derailment in addition to the multiple advantages both for the masonry reduced to a single area of the foundation, and as regards maintenance.

The self-supporting system ensures the opening of the passage in any weather condition because it avoids the problems related to the formation of ice in the sliding area of the door as "exceptional", both in the internal carriage and inside the monorail and always protected.

Another advantage is the possibility of installation in any type of ground that is not perfectly aligned, due to the lack of ground guide.

LA Palma

 

Made with perimeter profiles section 60 * 60 and 60 * 160 and 60 * 120 for sliding and swing gates, thickness
minimum 5mm, 4mm thick cladding sheet, 20x5 round vertical rods.
The gates of the round line can have decorations as per our catalog and lances, all in aluminum
Concealed hinges inside the profile with stainless steel pins, brass bushings and grease nipple, the hinges are
adjustable and equipped with cover plate.
The gates will be supplied with our standard sandblasting degreasing and powder coating process
standard.

Devis

 

Made with perimeter profiles section 60 * 60 and 60 * 160 and 60 * 120 for sliding and swing gates, thickness
minimum 5mm, 4mm thick cladding sheet, 20x5 round vertical rods.
The gates of the round line can have decorations as per our catalog and lances, all in aluminum
Concealed hinges inside the profile with stainless steel pins, brass bushings and grease nipple, the hinges are
adjustable and equipped with cover plate.
The gates will be supplied with our standard sandblasting degreasing and powder coating process
standard.

Miravalles

 

Made with perimeter profiles section 60 * 60 and 60 * 160 and 60 * 120 for sliding and swing gates, thickness
minimum 5mm, 4mm thick cladding sheet, 20x5 round vertical rods.
The gates of the round line can have decorations as per our catalog and lances, all in aluminum
Concealed hinges inside the profile with stainless steel pins, brass bushings and grease nipple, the hinges are
adjustable and equipped with cover plate.
The gates will be supplied with our standard sandblasting degreasing and powder coating process
standard.

Raissa with wood effect slats

 

Made with perimeter profiles section 60 * 60 and 60 * 160 and 60 * 120 for sliding and swing gates, thickness
minimum 5mm, 4mm thick cladding sheet, 20x5 round vertical rods.
The gates of the round line can have decorations as per our catalog and lances, all in aluminum
Concealed hinges inside the profile with stainless steel pins, brass bushings and grease nipple, the hinges are
adjustable and equipped with cover plate.
The gates will be supplied with our standard sandblasting degreasing and powder coating process
standard.

Features

  • Sliding gate is a self-supporting construction, the self-supporting complex is located at the foundation by foundation bolts.

  • The door moves a few centimeters from the ground, having a free and clean road, without a running track.

  • Depending on the reason, the filling consists of aluminum profiles and sheets.

  • The 95 x 85 mm bearing guide is fixed to the gate leaf by means of stainless steel screws. The guide rail is made of galvanized steel - this unique production process is one of the most important elements of the sliding gate that guarantees safe, harmonious and silent travel

  • Guide rail and diameter 95 x 85 mm.

 

Some of our gates can be equipped with a quick assembly aluminum cantilever kit .


The complete kit includes:


N ° 1: Arch in closed position made with profiles 100 mm x 100 mm x 4 thick.
Floor fixing plate 20 mm thick, lower gate support bracket in rest position, upper centering and anti-derailing trolley.


N ° 1: Aluminum support structure on the projection side, made with a grid of aluminum profiles section 100 mm x 100 mm on a 20 mm thick fixing plate plus provision for fixing holes to the floor and lower carriage fixing holes on the opening side.
Complete with upper trolleys for gate sliding and anti-derailment.
The width of the structure will be proportionate to the size and model.


N ° 1: Box with door for motor cover and wiring, equipped with lock and hinges.


N ° 1: 20 mm thick aluminum plate for second trolley including floor fixing holes.

Quick assembly kit for cantilevered sliding gates

Quick assembly kit for sliding gates

Some of our gates can be equipped with quick assembly aluminum sliding kit .


The complete kit includes:


N ° 1: Arch in closed position made with profiles 100 mm x 100 mm x 4 thick.
Floor fixing plate 20 mm thick, lower gate support bracket in rest position, upper centering and anti-derailing trolley.


N ° 1: Support structure on the projection side in aluminum, made with a network of aluminum profiles section 100 mm x 100 mm on a 20 mm thick fixing plate plus provision for fixing holes to the floor
Complete with upper trolleys for gate sliding and anti-derailment.
The width of the structure will be proportionate for the size and model.


N ° 1: Box with door for motor cover and wiring, equipped with lock and hinges.

 

logo Alutrend www.alutrendgates.com

Opening time

 

Monday: 09:00 - 18:00


Tuesday: 09:00 - 18:00


Wednesday: 09:00 - 18:00


Thursday: 09:00 - 18:00


Friday: 09:00 - 18:00


Saturday: Closed


Sunday: Closed

Contacts

 

Via del Puglia Loc. Bivio Pomonte

06035 Gualdo Cattaneo (PG) Italy

 

For quotes, E-mail: info@alutrend.it

 

For advice and information

E-mail: marketing@alutrend.it

 

Advice and information for Italy

Whatsapp - Tel: + 39 3404530317

 

Advice and information for abroad

Whatsapp - Tel: + 0447821787914

Partners and distributors

Do you want to become a reseller of Alutrend products? Contact us using the appropriate form to request more information. We will be happy to contact you as soon as possible.

  • Bianco Facebook Icon
  • Bianco LinkedIn Icon
  • Bianco Instagram Icona
  • Bianco Twitter Icon
  • Bianco Houzz Icona

ALUTREND © 2011 | PI 00291220549

Via del Puglia Loc. Bivio Pomonte | 06035 GualdoCattaneo (PG) Italy | Tel: +39 0742 91382 | Fax: +39 0742 928147 | Email info@alutrend.it