Opening system
automatic
Swing opening
with underground motors ( Nice BM4000 )
For swing gates with leaves up to 4 m, concealed underground installation. 230 Vac irreversible electromechanical gearmotor and mechanical stops.
Foundation boxes with mechanical stop on opening:
• in stainless steel (BMB0X4I), ideal for use in extreme conditions,
• in cataphoresis (BMB0X4), highly resistant to corrosion.
Maximum freedom of choice: release from inside and outside, two freely combinable key or lever models that are easy to operate with just one hand.
Easy to use: mechanical stop system on closing integrated in the motor.
Standard 110° opening, optional 360°.
Attention, the price refers to the motor only, without the foundation box
Swing opening
with arm motors ( NI-HO7124 )
IRREVERSIBLE 24 Vdc, COMPLETE WITH ARTICULATED ARM, WITH INTEGRATED CONTROL UNIT.
For swing gates with leaves up to 2.4 m, even in the presence of large columns and light structures.
24 Vdc irreversible electromechanical gear reducer. With articulated arm and external mounting. Ideal for intensive use.
Two irreversible 24 Vdc versions with mechanical stops with millimetric adjustment in opening and closing: with integrated control unit (HO7124) and without control unit (HO7224).
Swing opening
with arm motors up to 5 meters ( Nice TO5024 )
Large and convenient connection compartment: quick and easy access from above to the internal parts located in the upper compartment of the engine. Simple installation and maintenance; with built-in capacitor. Recommended control units: Mindy A6F, A60, A700F; for TO4024 Moonclever MC824H. 24 Vdc version with magnetic encoder. Ideal for intensive use, compatible with the Moonclever control unit:
• simple programming, with a single key;
• self-learning of the opening and closing limit switches;
• self-diagnosis of anomalies;
• pause time programming;
• pedestrian leaf;
• deceleration in opening and closing;
• dual technology obstacle detection;
• operation in the absence of current with optional rechargeable batteries (PS324);
• prearranged for the connection of latest generation sensitive edges
Sliding opening
with exposed motor ( NICE ROBUS BT RB400KCE 24V )
Simple: thanks to the BlueBUS system which allows two-wire connections between the control unit and up to 7 pairs of MoonBus series photocells, control, safety and signaling devices
Practical: control unit and PS124 buffer batteries (optional) that can be connected via a convenient guided plug-in connector, housed inside the Robus
Advanced: RB400 is equipped with a temperature sensor which adapts the motor force to the climatic conditions while at the same time adjusting for thermal protection. A master/slave selection also automatically synchronizes 2 motors, allowing the automation of sliding gates with two opposite leaves
Intelligent: thanks to obstacle detection and automatic programming of working times. Self-diagnosis with signaling through the flashing light. 8 programming levels.
Safe: adjustable acceleration and deceleration at the start and end of each manoeuvre. Silence, geared motor on bearings.
Sturdy: Base and release in die-cast aluminum with epoxy paint.
Silent: gearmotor on bearings
Sliding opening
With column internal motor ( Nice NKSL 400 )
Nice NKSL400 Concealed motor for sliding gates 400kg with NAKED SLIDING 400 control unit
The first Nice retractable motor for sliding gates up to 400 kg and leaf length up to 6 metres.
Motor with built-in control unit and absolute encoder, which can be installed inside a suitably drilled small column.
The very small size allows the motor to be housed in even very thin columns, with a minimum internal dimension of 140X140 mm.
Simple: thanks to the BlueBUS system which allows connections with only two wires between the control unit and up to 7 pairs of photocells of the MoonBus series, command, safety and signaling devices.
Master/slave selection: it also automatically synchronises 2 motors, allowing the automation of sliding gates with two opposite leaves.
Intelligent: thanks to obstacle detection and automatic programming of working times. Self-diagnosis with signaling through the flashing light.
Safe: adjustable acceleration and deceleration at the start and end of each manoeuvre.
Simple and precise limit switch adjustment: integrated absolute limit switch, quick learning with a single maneuver with the motor released.
Practical: control unit and PS124 buffer batteries (optional) that can be connected via a convenient plug-in connector.
Flexible: it is possible to arrange the release on both sides of the column and/or on the outside (with the KIO and KA1 accessories). Easy installation also on existing columns.
Pedestrian opening
- WL1024C Electromechanical gear motor for surface mounting with control unit and OXI plug-in receiver.
- ON2E 433.92 MHz transmitter.
- TS Signage table.
For swing gates with a leaf up to 1.8 m.
Particularly suitable for aluminum, wood or PVC gates.
24 Vdc irreversible electromechanical reduction motor, with articulated arm.
Ultra compact: ideal for pedestrian gates, recommended
for small columns (8 cm wide).
Safe: thanks to the irreversible motor and the anti-shearing arm with built-in mechanical closing limit switch
(with full arm installation).
Practical: the articulated arm makes installation possible in particular conditions, such as in the presence of low walls or obstacles adjacent to the column.
Rapid: no waiting in front of the gate, only 7 seconds to open or close (in optimal installation conditions, with reduced arm and 90° opening).
Convenient: integrable LED flashing light, with courtesy light function (WLT, optional); rapid motor release to operate the gate manually.
Integrated control unit:
• simple programming;
• self-learning of the opening and closing limit switches;
• self-diagnosis of anomalies;
• pause time programming;
• pedestrian leaf;
• deceleration in opening and closing;
• prearranged for the connection of latest generation sensitive edges.
No blackouts: operation in the absence of current with the optional batteries (PS424) housed inside the motor.